DOUBLE EAGLE M85 AIRSOFT GUN G36C REPLICA FULL AUTOMATIC RIFLE (Misc.) newly tagged "airsoft gun"

DOUBLE EAGLE M85 AIRSOFT GUN G36C REPLICA FULL AUTOMATIC RIFLE (Misc.)
By AirSoft

Buy new: $36.00

First tagged "airsoft gun" by Christina Arledge
Customer tags: airsoft(2), airsoft gun, cheap airsoft guns, airsoft g36c, electric guns, gun, double eagle

Coated lense binoculars means that one or more surfaces are covered with one layer of anti-reflective coating. If only one or a limited number of air to glass surfaces are covered such binoculars will provide you little more light transmission than binoculars with no lens coatings.
If the lenses are fully coated it means that air to glass surfaces are covered with one layer of anti-reflective coating.
Multi-coated lenses means that one or more air to glass surfaces are covered with multiple layers of anti-reflective coating. You have to be careful as just one surface could be coated!
Fully multi-coated lense binoculars are the best that you can buy. All air to glass surfaces are covered in multiple layers of anti reflective coating.

Optics with lens coatings used to come with a hefty price tag but now most binoculars come with lens coatings in one form or another and top quality fully multi-coated lens binoculars are often within the price range of many users.

About Coated Lense Binoculars

The difference between fully coated lense binoculars and fully multi-coated might not sound that great but once you have owned binoculars with the best quality optics and coatings you'll never look back. The light transmission, resolution and clarity of top quality lenses is amazing and the enhanced viewing generally makes the higher price tag well worth it.

About Coated Lense Binoculars

There are basically four grades of coated lense binoculars although some manufacturers have developed their own, exclusive, high quality coatings which offer greater durability and further improved light transmission with other added advantages:

Fully coated lenses can increase light transmission from 50% to around 80 - 85% which is now the norm for low cost optics. If you want something a bit more special that will increase light transmission to 95% or above then you want to go for fully multi coated lense binoculars and, for extra durability and advance quality viewing, take a look at the exclusive coatings offered by some of the top manufacturers. Bushnell Elite come with Bushnell's exclusive XTR technology (60 layers of coatings on each prism) which delivers 99.73% light transmission per lens.

What Not to Bring to the Emmys: An Air Rifle (LAist)

A worker entering the media and other-attendee entrance at the Emmy Awards was stopped and briefly detained at a police checkpoint when an officer noticed a rifle in the trunk. The episode prompted traffic to be stopped at various checkpoints around the Nokia Theatre in downtown. The incident that began shortly before 4:00 p.m. only lasted twenty minutes after the gun was found to be a ...

I found my DPMS stripped lower receiver at a local gunshow. I would strongly recommend that you check out a gun show before ordering online/locally. Usually, there are some decent deals around and you won't have to pay the FFL transfer fee as you would if you bought it online. By the way, the only part that is regulated by the government is the stripped lower receiver. This means that background checks and laws apply to lower receivers the same way they apply to fully completed rifles, pistols, etc. On the plus side, once you have the stripped lower receiver, you can order/buy all the other parts without any hassle and have them shipped directly to your door.

Building an AR-15 - Lower Receiver

I started putting together the lower without any punches, but when it came time to punch down the trigger guard roll pin, I was wishing I had one. Trying to improvise, I used my Swiss Army multifunction tool to hammer in the pin. After at least 15 minutes, I had finally gotten the pin in, but left the trigger guard all scratched up from my barbaric hammering. Not only that, but when you have to drive the bolt catch roll pin in, you will wish you had a punch. There is not enough clearance between the pin and the rifle to McGuyver something to drive the pin; you must use a punch!

Building an AR-15 - Lower Receiver

1) Stripped lower receiver - basically a hunk of metal with holes and openings, no moving parts
2) Lower Parts Kit (LPK) - contains all the parts you'll need to complete the lower and assemble the trigger, trigger guard, hammer, magazine catch, and bolt catch
3) Stock - these all vary in styles, from fixed A2 style to 6 position collapsible stocks

The lower receiver is made up of 3 main items:

Other than that, the rest of the process went fine. Only thing is, I'll need a CAR wrench to tighten down the stock, but it should be too big of an issue.